Sump Pump Service: How To Tell If Your Sump Pump Is Working Properly

Sump Pump Service: How To Tell If Your Sump Pump Is Working Properly

If you’ve been flooded in your home or business, the first step to prevent further damage is to contact a Sump Pump Service. The professionals at Los Angeles Plumbing Service will help you locate the lowest point on your property and dig a hole. The plumbers will attach a pipe to the sump pump and connect it to a safe water disposal area. Floodwater will naturally find its way to the lowest point of the ground beneath your home. Once it reaches that level, it will activate and remove water and floodwater.

Checking If The Sump Pump Is Working

When you’re not sure if your sump pump is working properly, one of the easiest ways to find out is to try running water through it. Pour some water into your sump pit until the float begins to rise.

If you notice that the water does not come out when the pump starts, it’s time for a service or a replacement. If you are not sure if your sump pump is working properly, try these tips to help you make an informed decision.

In addition to testing the electrical connections, check the float switch. If it is not working, you may need to replace the entire sump pump. The float switch can be bought at most home improvement stores or online, but make sure that it matches your pump model.

If the float switch isn’t working, you can also consider contacting a technician to replace the entire unit. In some cases, this may be an expensive option, but the alternative is not as expensive.

Checking If The Check Valve Is Working

One way to ensure that your sump pump is functioning properly is to make sure that the check valve is functioning correctly. If the check valve is not working correctly, water will continue to flow back into the sump pit. You can test if the valve is working properly by listening for a click sound from the valve.

You may also notice some moisture or leakage. If these are present, you should have your pump checked by a professional.

Flow rates are measured in gallons per minute, gallons per hour, or liters per second. The higher the flow rate, the more likely the check valve will wear and deteriorate. Faster flow rates will also affect the lifespan of the check valve.

Typically, the longer the check valve lasts, the more you will need to have it checked. During sump pump service, you will want to check the check valve at least once a year.

Checking To See If The Motor Is Running

If you suspect that your sump pump’s motor is not running, you can check for a few reasons. Firstly, make sure it’s connected to a power source. Many inspectors insist on a GFI outlet at the pump. This is because many pumps draw a large amount of amperage and will blow the integral breaker if not connected to a GFI-type outlet.

Otherwise, the failure will continue until you replace the outlet. Alternatively, if you have a standard type outlet, be sure to use the right-sized panel fuse or breaker.

If you still don’t see the motor, you should check for any obstruction in the sump basin. In some cases, the float switch may be jammed or tangled in the sump basin. If it is, then you may have a damaged component that needs to be replaced.

If your pump is not turning on, you may also want to try bypassing it with a new float switch. If your pump still won’t turn on, you may need to replace the pump altogether.

Checking To See If The Drain Line Is Connected Properly

One of the first steps to repairing a sump pump is to check that the drain line is connected correctly. The discharge line starts off at an angle and then pitches down toward the pump’s exit point.

Water is directed out of the home by gravity, but if the drain line is broken, water may come back into the pit and cause damage to the pump. If this occurs, call a professional sump pump repair company to check the connection.

A sump pump service professional can install a drain line and test it to ensure proper operation. A properly installed pump should have a backup power source and a check valve to prevent backflow.

Make sure the drain line has a discharge relief hole to release excess air pressure. The sump pump service professional should also check the operation of any alarms on the pump. A properly installed sump pump will sound an alarm if water is accumulating in the basement.

Checking To See If The Motor Is Sized For The Job

A sump pump motor is an engine that moves the water from one area of the basement to another. It can vary in horsepower, so it’s important to know how much horsepower you need before you purchase one. Most sump pumps use a 1/4 to 1/3-horsepower motor, so you don’t need to purchase a powerful motor if you’re only dealing with minor moisture problems.

A pump’s head pressure, or lift capacity, measures how high it can raise water from the sump pit to an outlet pipe. It should also have a ground-fault circuit interrupter outlet.

Checking to see if the motor is right for the job of a sump pump should be done every year, at least, or whenever there’s a problem with it. A malfunctioning motor can cause the pump to struggle to discharge all of the water that enters the house and ultimately burn out the motor.

The water that leaves the sump pump has to go six to ten feet vertically to exit the house. Having a malfunctioning check valve can also increase backpressure, putting additional strain on the pump’s motor.

Also, read;- Why regard water cooler dispensers for residence and commercial establishments

Leave a Reply

Your email address will not be published.